Izvori napajanja

POWER SUPPLIES
Power supplies are built upon customer order and requirements. Linear or switch-mode, for a wide range of input and output voltage in the power range from 10W to several kW, with different forms of housing ... The production program includes: -rectifiers (ac-dc converters) -battery chargers -rectifiers for electroplating and electrolysis -inverters (dc-ac converters) -uninterrupted power supplies -dc-dc converters-(step-up, step-down) -correctors - voltage stabilizers -transformers 230/115V Some products are shown below as an illustration.
SWITCH MODE POWER SUPPLY 100...200...500W....2kW
		-input voltage: 230 Vac -output voltage: according to customer requirement -overload and short circuit protection -high efficiency (switching frequency 100kHz) -soft-start and low starting current from the network -cooling: natural (100/200W) + thermostatically controlled fan (500W) -output voltage presence LED -metal housing -the possibility of mounting in two positions
SUPPLY 230Vac/24Vdc 1A	DIN RAIL MOUNTING	REGULATED DC SOURCE

RACK MOUNT/DESKTOP TELECOM POWER SUPPLY 30...75V, max 27A
	Designed for consumers in the telecommunications, covering the nominal voltages of 48 and 60V. Can be operated as stand-alone unit or in parallel with batteries. -input: 230Vac -PFC input (sinusoidal input current) -output voltage adjustable: 30 ... 75V -maximum output current: 27A -parallel operation of multiple devices in order to provide higher currents	-alarm for low-voltage, fault, fuse blow -low level output voltage ripple -efficiency: better than 86% -standard 19 "housing allows mounting in rack or use as a desktop unit
REGULATED SUPPLY	SUPPLY (230vac) FOR LAPTOP COMPUTER	BATTERY (12Vdc) POWERED SUPPLY FOR LAPTOP

BATTERY DISCHARGER	SUPPLY 0-60V/0-100A FOR ELECTROPLATING
Discharge the battery for stand-by use in order to maintain or test their capacity (railways, telecommunications, electricity ...). They are produced according to customer requirement and cover the nominal battery voltage from 12 to 220Vdc, and current range from a few to over a hundred amperes. The basic set of instruments consists of ampere meter, volt meter and Ah-meter. Electronic provides a constant current discharge or constant resistance, automatically stops working when the battery runs out.
BATTERY CHARGER 24V/50A	AUTOMATIC BATTERY CHARGER
		-charging method: I / U / U -detects and alarms if battery is damaged or inverse polarized -charge current: 10A -nominal battery voltage: 24V (or 12V) -suitable for cyclic charging or stand by use.
BACK UP SUPPLY FOR GARAGE DOOR	UNINTERRUPTIBLE SUPPLY 230Vac AND 24Vdc
Backup supply for roller doors, garage gates and other consumers. It comes with its own battery or external battery connection.	PROFESSIONAL uninterruptible power supply that provides continuous 230Vac and 24Vdc. Static bypass switch, complete automation driven by the micro controller, sealed batteries, remote signaling for most operating conditions ...
UNINTERUPTIBLE SUPPLY 48Vdc	SINUSOIDAL INVERTER
It consists of a stabilized rectifier, batteries and charger. When line is on a power charger keeps the battery charged. The AC/DC power supply provides a stable DC voltage for consumers. If the line voltage disappears consumers takes power from batteries. The transition from the network to the battery voltage is continuous (0 seconds).		SINUSOIDAL INVERTER 400VA 48Vdc/230Vac It is designed to provide line voltage for electronic equipment in telecom (computers, monitors, modems ...). The input filter provides low psofometric voltage (<2.5mV). Digital high frequency generation of output voltage and built-in filters offer high stability of the amplitude (+/-2%) and frequency of output voltage and low distortion factor (<1%). INVERTER 300VA 24Vdc/220Vac It is designed to power the TV and video equipment in buses or other equipment (measuring instruments and other electronic equipment) in circumstances where 24V DC voltage is available (vehicles, field operations...). Basic features: -Input voltage: 21 ... 28V -Output voltage: 230V, 50Hz -Output voltage waveform: PWM square wave -Power: 300VA -Metal body
DC-DC CONVERTER 24V/12V, 25A	DC-DC CONVERTER 10...30V/5V, 1,2A
-input voltage: 24V (20-30Vdc) -output voltage: 12V + / -5% -continuous output current: 25A -protection against over-current and inverse polarity -allowed ambient temperature: -20 ... +45 ° C Scheduled for installation on the vehicle (24V voltage installation) and power consumers that require 12V for its operation.	-input voltage: 10 .. 30V -protection against inverse connection of the input voltage -output voltage: 5V 1.2A max -short-circuit protection -possible to mount on 35mm rail	400Hz VOLTAGE SOURCE This source with sin voltage output is made for the purpose of testing devices used in aviation. Output voltages 36Veff / 10A and 115Veff/5A, 400Hz was generated. Input voltage 230Vac are galvanic isolated from the output voltage. Built-in indicating instruments display output voltage and current. Sine wave is generated by PWM at high frequency so that the filter elements are small and the whole unit is portable.
INVERTER 110VDC/230VAC	TRANSFORMER 230/115V
Input voltage: 110VDC Output voltage: 230V, 50Hz sine wave Output power:2000VA
REGULATED SUPPLY 0-300Vdc/5A
		-input voltage: 230 Vac -output voltage: Adjustable, 0-300 Vdc with midpoint (2x0 ... 150V output) -maximum current: 5A -robust metal housing suitable for transportation and field work
UNINTERUPTIBLE SUPPLY FOR GAS ALARM

In order to rationalize production and continuous improvement of product quality changes are possible in the appearance and characteristics of actual devices compared to this catalog.
ABOUT US PRODUCTS

POWER SUPPLIES

Power supplies are built upon customer order and requirements. Linear or switch-mode, for a wide range of input and output voltage in the power range from 10W to several kW, with different forms of housing ...

The production program includes:

-rectifiers (ac-dc converters)
-battery chargers
-rectifiers for electroplating and electrolysis
-inverters (dc-ac converters)
-uninterrupted power supplies
-dc-dc converters-(step-up, step-down)
-correctors - voltage stabilizers
-transformers 230/115V

Some products are shown below as an illustration.

SWITCH MODE POWER SUPPLY 100...200...500W....2kW

-input voltage: 230 Vac
-output voltage: according to customer requirement
-overload and short circuit protection
-high efficiency (switching frequency 100kHz)
-soft-start and low starting current from the network
-cooling: natural (100/200W) + thermostatically controlled fan (500W)
-output voltage presence LED
-metal housing
-the possibility of mounting in two positions

SUPPLY 230Vac/24Vdc 1A

DIN RAIL MOUNTING

REGULATED DC SOURCE

RACK MOUNT/DESKTOP TELECOM POWER SUPPLY 30...75V, max 27A

Designed for consumers in the telecommunications, covering the nominal voltages of 48 and 60V. Can be operated as stand-alone unit or in parallel with batteries.

-input: 230Vac

-PFC input (sinusoidal input current)

-output voltage adjustable: 30 ... 75V

-maximum output current: 27A

-parallel operation of multiple devices in order to provide higher currents

-alarm for low-voltage, fault, fuse blow
-low level output voltage ripple
-efficiency: better than 86%
-standard 19 "housing allows mounting in rack or use as a desktop unit

REGULATED SUPPLY

SUPPLY (230vac) FOR LAPTOP COMPUTER

BATTERY (12Vdc) POWERED SUPPLY FOR LAPTOP

LAB2

BATTERY DISCHARGER

SUPPLY 0-60V/0-100A FOR ELECTROPLATING

Discharge the battery for stand-by use in order to maintain or test their capacity (railways, telecommunications, electricity ...). They are produced according to customer requirement and cover the nominal battery voltage from 12 to 220Vdc, and current range from a few to over a hundred amperes. The basic set of instruments consists of ampere meter, volt meter and Ah-meter. Electronic provides a constant current discharge or constant resistance, automatically stops working when the battery runs out.

BATTERY CHARGER 24V/50A

AUTOMATIC BATTERY CHARGER

-charging method: I / U / U

-detects and alarms if battery is damaged or inverse polarized

-charge current: 10A

-nominal battery voltage: 24V (or 12V)

-suitable for cyclic charging or stand by use.

BACK UP SUPPLY FOR GARAGE DOOR

UNINTERRUPTIBLE SUPPLY 230Vac AND 24Vdc

UPS ZA GARAŽNA VRATA

Backup supply for roller doors, garage gates and other consumers. It comes with its own battery or external battery connection.

GAS

PROFESSIONAL uninterruptible power supply that provides continuous 230Vac and 24Vdc. Static bypass switch, complete automation driven by the micro controller, sealed batteries, remote signaling for most operating conditions ...

UNINTERUPTIBLE SUPPLY 48Vdc

SINUSOIDAL INVERTER

rezervno napajanje 48vdc
It consists of a stabilized rectifier, batteries and charger. When line is on a power charger keeps the battery charged. The AC/DC power supply provides a stable DC voltage for consumers. If the line voltage disappears consumers takes power from batteries. The transition from the network to the battery voltage is continuous (0 seconds).

invertor 48v/230v

sinusni invertor

SINUSOIDAL INVERTER 400VA 48Vdc/230Vac

It is designed to provide line voltage for electronic equipment in telecom (computers, monitors, modems ...). The input filter provides low psofometric voltage (<2.5mV). Digital high frequency generation of output voltage and built-in filters offer high stability of the amplitude
(+/-2%) and frequency of output voltage and low distortion factor (<1%).

INVERTER 300VA 24Vdc/220Vac

It is designed to power the TV and video equipment in buses or other equipment (measuring instruments and other electronic equipment) in circumstances where 24V DC voltage is available (vehicles, field operations...).
Basic features:
-Input voltage: 21 ... 28V
-Output voltage: 230V, 50Hz
-Output voltage waveform: PWM square wave
-Power: 300VA
-Metal body

DC-DC CONVERTER 24V/12V, 25A

DC-DC CONVERTER 10...30V/5V, 1,2A

dc dc 24 12

-input voltage: 24V (20-30Vdc)
-output voltage: 12V + / -5%
-continuous output current: 25A
-protection against over-current and inverse polarity
-allowed ambient temperature: -20 ... +45 ° C
Scheduled for installation on the vehicle (24V voltage installation) and power consumers that require 12V for its operation.

-input voltage: 10 .. 30V
-protection against inverse connection of the input voltage
-output voltage: 5V 1.2A max
-short-circuit protection
-possible to mount on 35mm rail

400Hz VOLTAGE SOURCE

This source with sin voltage output is made for the purpose of testing devices used in aviation. Output voltages 36Veff / 10A and 115Veff/5A, 400Hz was generated. Input voltage 230Vac are galvanic isolated from the output voltage. Built-in indicating instruments display output voltage and current. Sine wave is generated by PWM at high frequency so that the filter elements are small and the whole unit is portable.

INVERTER 110VDC/230VAC

TRANSFORMER 230/115V

invertor 110vdc/230vac

Input voltage: 110VDC
Output voltage: 230V, 50Hz sine wave
Output power:2000VA

tranformatori 230/110V

REGULATED SUPPLY 0-300Vdc/5A

-input voltage: 230 Vac

-output voltage: Adjustable, 0-300 Vdc with midpoint (2x0 ... 150V output)

-maximum current: 5A

-robust metal housing suitable for transportation and field work

UNINTERUPTIBLE SUPPLY FOR GAS ALARM

In order to rationalize production and continuous improvement of product quality changes are possible in the appearance and characteristics of actual devices compared to this catalog.

ABOUT US PRODUCTS